Triple-region structure for turbulent-flow in a square duct - a finite-element approach

The Reynolds-averaged Navier-Stokes equations for describing the turbulent flow in a straight square duct are formulated with two different turbulence models. The governing equations are then expanded as a multi-deck structure in a plane perpendicular to the streamwise direction, with each deck characterized by its dominant physical forces as commonly carried out in analytical work using triple-deck expansion. The resulting equations are numerically integrated using higher polynomial (H-P) finite element technique for each cross-sectional plane to be followed by finite difference representation in the streamwise direction until a fully developed state is reached. The computed results using the two different turbulence models show fair agreement with each other, and concur with the vast body of available experimental data. There is also general agreement between our results and the recent numerical works anisotropic k-epsilon turbulence model.

Computation of turbulent-flow in a square duct - aspects of the secondary flow and its origin

A numerical study of turbulent flow in a straight duct of square cross-section is made. An order-of-magnitude analysis of the 3-D, time-averaged Navier-Stokes equations resulted in a parabolic form of the Navier-Stokes equations. The governing equations, expressed in terms of a new vector-potential formulation, are expanded as a multi-deck structure with each deck characterized by its dominant physical forces. The resulting equations are solved using a finite-element approach with a bicubic element representation on each cross-sectional plane. The numerical integration along the streamwise direction is carried out with finite-difference approximations until a fully-developed state is reached. The computed results agree well with other numerical studies and compare very favorably with the available experimental data. One important outcome of the current investigation is the interpretation analytically that the driving force of the secondary flow in a square duct comes mainly from the second-order terms of the difference in the gradients of the normal and transverse Reynolds stresses in the axial vorticity equation.

Feasibility of biodegradable PLGA common bile duct stents: An in vitro and in vivo study

The current study investigates the feasibility of using a biodegradable polymeric stent in common bile duct (CBD) repair and reconstruction. Here, poly(l-lactide-co-glycolide) (PLGA, molar ratio LA/GA = 80/20) was processed into a circular tube- and dumbbell-shaped specimens to determine the in vitro degradation behavior in bile. The morphology, weight loss, and molecular weight changes were then investigated in conjunction with evaluations of the mechanical properties of the specimen. Circular tube-shaped PLGA stents with X-ray opacity were subsequently used in common bile duct exploration (CBDE) and primary suturing in canine models. Next, X-ray images of CBD stents in vivo were compared and levels of serum liver enzymes and a histological analysis were conducted after stent transplantation. The results showed that the PLGA stents exhibited the required biomedical properties and spontaneously disappeared from CBDs in 4-5 weeks. The degradation period and function match the requirements in repair and reconstruction of CBDs to support the duct, guide bile drainage, and reduce T-tube-related complications.

玉米粉火焰在开口垂直管道中的传播

以对粉尘云状态参数的定量测定为基础，对玉米粉尘火焰在开口垂直管道中向上传播的过程进行了实验研究．在情形A中，火焰从管道的封闭端向开口端传播，在情形B中，从开口端向封闭端传播．实验中，观察到两种粉尘火焰，即湍流火焰和层流火焰，火焰形态转变对应的点火延迟时间约等于1．1s，即粉尘云湍流运动强度为10cm／s．情形A中，层流火焰的传播出现周期性振荡现象，湍流火焰在传播过程中不断加速；情形B中，两种火焰都匀速传播，湍流火焰传播速度明显大于层流火焰．在所考察的实验条件下，粉尘浓度对于玉米粉尘火焰传播速度的影响不大。

Numerical Simulation and Experimental Investigation about Internal and External Flows

In this paper, TASCflow3D is used to solve inner and outer 3D viscous incompressible turbulent flow (R-e = 5.6 X 10(6)) around axisymmetric body with duct. The governing equation is a RANS equation with standard k-epsilon turbulence model. The discrete method used is a finite volume method based on the finite element approach. In this method, the description of geometry is very flexible and at the same time important conservative properties are retained. The multi-block and algebraic multi-grid techniques are used for the convergence acceleration. Agreement between experimental results and calculation is good. It indicates that this novel approach can be used to simulate complex flow such as the interaction between rotor and stator or propulsion systems containing tip clearance and cavitation.

Effects of entry conditions on cracked kerosene-fueled supersonic combustor performance

Supersonic combustion of thermally cracked kerosene was experimentally investigated in two model supersonic combustors with different entry cross-section areas. Effects of entry static pressure, entry Mach number, combustor entry geometry, and injection scheme on combustor performance were systematically investigated and discussed based on the measured static pressure distribution and specific thrust increment due to combustion. In addition, the methodology for characterizing flow rate and composition of cracked kerosene was detailed. Using a pulsed Schlieren system, the interaction of supercritical and cracked kerosene jet plumes with a Mach 2.5 crossflow was also visualized at different injection temperatures. The present experimental results suggest that the use of a higher combustor entry Mach number as well as a larger combustor duct height would suppress the boundary layer separation near the combustor entrance and avoid the problem of inlet un- start.

Numerical Simulation and Experimental Investigation about Internal and External Flows

In this paper, TASCflow3D is used to solve inner and outer 3D viscous incompressible turbulent flow (R-e = 5.6 X 10(6)) around axisymmetric body with duct. The governing equation is a RANS equation with standard k-epsilon turbulence model. The discrete method used is a finite volume method based on the finite element approach. In this method, the description of geometry is very flexible and at the same time important conservative properties are retained. The multi-block and algebraic multi-grid techniques are used for the convergence acceleration. Agreement between experimental results and calculation is good. It indicates that this novel approach can be used to simulate complex flow such as the interaction between rotor and stator or propulsion systems containing tip clearance and cavitation.

An Experimental Study on Flame Propagation in Cornstarch Dust Clouds

Following the quantitative determination of dust cloud parameters, this study investigates the flame propagation through cornstarch dust clouds in a vertical duct of 780 mm height and 160 x 160 mm square cross section, and gives particular attention to the effect of small scale turbulence and small turbulence intensity on flame characteristics. Dust suspensions in air were produced using an improved apparatus ensuring more uniform distribution and repeatable dust concentrations in the testing duct. The dispersion-induced turbulence was measured by means of a particle image velocimetry (PIV) system, and dust concentrations were estimated by direct weighing method. This quantitative assessment made it possible to correlate observed flame behaviors with the parameters of the dust cloud. Upward propagating dust flames, from both closed/open bottom end to open/closed top end of the duct, were visualized by direct light and shadow photography. From the observation of propagation regimes and the measurements of flame velocity, a critical value of the turbulence intensity can be specified below which laminar flame propagation would be established. This transition condition was determined to be 10 cm/s. Laminar flames propagated with oscillations from the closed bottom end to the open top end of the testing duct, while the turbulent flames accelerated continuously. Both laminar and turbulent flames propagated with steady velocity from the open bottom end to the closed top end of the duct. The measured propagation velocity of laminar flames appeared to be in the range of 0.45-0.56 m/s, and it was consistent with the measurements reported in the literature. In the present experimental study, the influence of dust concentration on flame propagation was also examined, and the flame propagation velocity was found weakly sensitive to the variations in dust concentration. Some information on the flame structure was revealed from the shadow records, showing the typical heterogeneous feature of the dust combustion process.

非晶状体βγ晶状体蛋白与三叶因子蛋白复合物诱导兔胸主动脉环内皮依赖的持续收缩效应

脊椎动物中,非晶状体βγ-晶状体蛋白广泛分布于各种组织,但是功能知之甚少.三叶因子在创伤修复与肿瘤发生中具有重要作用,其分子作用机制尚不清楚.非晶状体βγ晶状体蛋白与三叶因子蛋白复合物(βγ-CAT)是一个从大蹼铃蟾皮肤分泌物中分离的一类全新的蛋白复合物.研究表明,βγ-CAT能够诱导离体的兔胸主动脉产生快速而持续的收缩,结合药理学抑制剂,细胞培养,激光共聚焦显微镜和免疫荧光原位组化,从细胞和分子水平对其作用机制进行研究.结果表明:.βγ-CAT诱导兔胸主动脉产生的收缩效应为剂量依赖(2-35 nmol/L)和内皮依赖(P＜0.01).在βγ-CAT(25nmol/L)处理的主动脉环的内皮细胞层检测到肿瘤坏死因子-α的释放.同时,βγ-CAT能够诱导原代培养的兔胸主动脉内皮细胞(RAEC)快速释放肿瘤坏死因子-α,βγ-CAT(25nmol/L)分别处理5和30min,RAEC释放的肿瘤坏死因子-α的浓度分别为(34.17±5.10)pg/mL和(98.01±4.67)pg/mL(P＜0.01).表明肿瘤坏死因子-α在βγ-CAT诱导兔胸丰动脉产生的收缩效应中发挥重要作用.为进一步深入研究非晶状体βγ晶状体蛋白与三叶因子的生理功能提供了新的思路和线索.

A new species of sisorid catfish genus Glyptothorax (Teleostei: Sisoridae) from Salween drainage of Yunnan, China

A new species of the genus Glyptothorax, Glyptothorax obliquimaculatus sp. nov. is described from the Xiaohei River, a tributary of the Nanting River, Salween drainage, in southwestern Yunnan province, China. This new species can be distinguished from its congeners by the following combination of characteristics: unculiferous ridges of the thoracic adhesive apparatus extending anteriorly onto the gular region; body with irregular dark blotches scattered along lateral surface (blotches mostly oblique); skin smooth on head and body; dorsal spine smooth without serrations on its posterior margin; lips smooth; posterior margin of pectoral spine with 7-8 serrations; dorsal-fin base 11.0-13.2% SL; pectoral-fin length 15.6-19.6% SL; depth of caudal peduncle 8.6-9.8% SL; head width 19.1-24.0% SL; nasal barbel length 23.3-33.3% HL.

Predominant expression and cellular distribution of fish Agr2 in renal collecting system

Anterior gradient 2 (Agr2) genes encode secretory proteins, and play significant roles in anterior-posterior patterning and tumor metastasis. Agr2 transcripts were shown to display quite diverse tissue distribution in different species, and little was known about the cellular localization of Agr2 proteins. In this study, we identified an Agr2 homologue from gibe[ carp (Carassius auratus gibelio), and revealed the expression patterns and cellular localization during embryogenesis and in adult tissues. The full-length cDNA of CagAgr2 is 803 nucleotides (nt) with an open reading frame of 510 nt encoding 169 amino acids. The Agr2 C-terminus matches to the class I PDZ-interacting motif, suggesting that it might be a PDZ-binding protein. During embryogenesis, CagAgr2 was found to be transcribed in the mucus-secreting hatching gland from tailbud stage and later in the pharynx region, swim bladder and pronephric duct as revealed by RT-PCR and whole mount in situ hybridization. In the adult fish, its transcription was predominantly confined to the kidney, and lower transcription levels were also found in the intestine, ovary and gills. To further localize the Agr2 protein, the anti-CagAgr2 polyclonal antibody was produced and used for immunofluorescence observation. In agreement with mRNA expression data, the Agr2 protein was localized in the pronephric duct of 3dph larvae. In adult fish, Agr2 protein expression is confined to the renal collecting system with asymmetric distribution along the apical-basolateral axis. The data provided suggestive evidence that fish Agr2 might be involved in differentiation and secretory functions of kidney epithelium. (C) 2009 Elsevier Inc. All rights reserved.

Fridericia dianchiensis sp nov (Enchytraeidae, oligochaeta) from Yunnan Province, China

Fridericia dianchiensis, a new enchytraeid species collected from Yunnan Province, is described here. It is characterized by a combination of the following characters: 1) lateral bundles containing maximum 3 chaetae; 2) esophageal appendages with 3-4 simple, terminal branches; 3) dorsal vessel originating in XX-XXIII; 4) sub-neural glands absent; 5) seminal vesicle large, occupying two segments; 6)clitellum girdle-shaped or gland cells absent between bursal slits and pre-middle ventrally; 7) coelomocytes without refractile vesicles, 8) spermatheca without diverticula and both ampullae broadly united; and 9) long spermathecal ectal duct without gland at the orifice.

A taxonomic study of Oconnorella (Enchytraeidae, Oligochaeta) from Changbaishan Mountain, China

We describe three enchytraeid species, including two new species, from Mt. Changbaishan, Jilin Province, northeastern China. Oconnorella cheni sp. nov. is characterized by a simple spermatheca; absence of the oesophageal appendages and seminal vesicle; and nephridia from 6/7, with a distinct funnel and the efferent duct arising from the anterior part of the postseptale. Oconnorella globula sp. nov. is distinguished by a spermatheca with two diverticula; lack of oesophageal appendages and seminal vesicle; and nephridia from 6/7, with distinct funnel and the efferent duct arising from the mid-ventral or posteroventral part of the postseptale. We redescribe Oconnorella changbaishanensis (Xie et al., 2000) from type and live specimens, and amend some characters that cannot be investigated clearly from mounted specimens. We revise the generic diagnosis of Oconnorella.

Fridericia nanningensis, a new terrestrial enchytraeid species (Oligochaeta) from southwestern China

Fridericia nanningensis, a new species from wetland soil of Nanhu Park, Nanning city, the capital of Guangxi Zhuang Autonomous Region in southwest China, is described. It is characterized by 2-4 chaetae per bundle, poorly-developed clitellar glands, slender, unbranched peptonephridia, and spermathecae with 2 ampullar diverticula, a deep constriction in the middle of the ampulla and one large ectal gland. It is closely related to the European species, F. alata Nielsen & Christensen, 1959 and the East European species, F. tubulosa Dozsa-Farkas, 1972 by the shape of peptonephridia and the undeveloped clitellar glands. It differs from F. alata by its shorter body length and fewer chaetae per bundle, its type of coelomocytes (type "c"), its deep constriction in the middle of the spermathecae ampulla and a larger ectal gland, and it differs from F. tubulosa by its pale epidermal glands, its more anterior origin of the dorsal vessel, a deep constriction in the middle of the spermathecae ampulla, shorter ectal duct, and only one ectal gland at the spermathecal orifice.

交变流动中压力速度之间相位差对突变截面损失的影响分析

从弱非线性热声理论出发,给出交变流动中突变截面阻力系数的定义以及考察方法。通过PIV(粒子成像测速仪)测量与CFD计算结果的对比,验证了CFD计算结果的可靠性。进而利用CFD模拟考察了交变流动中压力与速度之间相位差对突变截面局部损失的影响,观察到产生这种影响的流场内部流动机制。分析表明,阻力特性确实对声场压力与速度之间的相位差存在依赖性,但这种依赖性会随着非线性的增强而减少。